PRx Barbell Warranty

PRx barbells are backed by a lifetime warranty against bending. The warranty does not cover bars or bar components that have been damaged due to careless or faulty use, modification, inadequate or lack of maintenance or improper storage by the user. Careless or faulty use includes, but is not limited to, accidental dropping or bailing of the bar onto spotter arms, benches, boxes, or any other object that may interfere with the bar’s free fall to the platform or floor, repetitive dropping of the bar with damaged bumper plates, any dropping of the bar with steel plates only, or no weight at all. The warranty does not cover the bar coating. Any and all claims regarding PRx barbells will be reviewed individually to ensure 100% customer satisfaction.

Proper care, usage, and maintenance of PRx barbells

For your safety, barbell collars should be used at all times. Never drop a PRx barbell on hard surfaces such as concrete or asphalt without proper bumper plates and collars. Never use a barbell that is damaged or not working properly, failure to do so may cause severe injury. All finishes can and will rust if exposed to high levels of humidity and/or perspiration.

Your PRx barbell is a fine piece of American made equipment and should be treated as such. It is recommended you periodically clean the knurling using a stiff nylon or plastic brush to remove oxidation or residue.

DO NOT clean with a steel wire brush.

Please note normal wear and tear of PRx barbells is not covered by the above listed warranty.

General Use:

Olympic Elite barbells are intended for indoor or outdoor use.
Negligent or faulty use includes abusive dropping of these bars (i.e., dropping the bar on a box, bench, spotter arms or pins in a power rack, excessive dropping with iron plates and similar usage.)
Do not remove the end caps for any reason; doing so will void the manufactures warranty.

Care:

Bare Steel Bars, Zinc Bars and Aluminum Bars
- Remove chalk build up by brushing gently with a bristle brush.
- Apply 3-in-1 oil or WD-40 to the bar.
- After oil is applied, brush with bristle brush.
- Using a lint free cloth, wipe the bar to remove any excess oil.

Storage:

Store indoors in a clean, dry environment